Sharp LC-32G4U

13
LC-32G4U/G4D
LC-37G4U/G4D
8.Remove the Earth Plate and the 13 Shielding Plate mounting screws q to detach the Earth Plate, the Shielding
Plate and the wire holder.
9.Remove the 2 top operation section assembly mounting screws w.
10.Remove the FPC. (with ferrite core)
11.Remove the 16 leads from fluorescent lights e.
12.Remove the 4 angles r.
13.Remove the 1 TMDS RX PWB mounting screw t.
12
Top Operation Section
Assembly
Wire Holder
FPC
13
13
11
Shield Plate
Earth Plate
15
14
TMDS RX PWB
14
14
14