8
-
NOTE
• You may be prompted to select your local cable
operator before running the cable scan mode�
E Select a digital audio language
Select 1st Audio or 2nd Audio�
NOTE
• If your selected audio language is not broadcasted, the
default audio language will be displayed�
E Auto CH Search
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels�
E Update CH
Update CH has similar function with Auto CH
Search� The difference is you can update channel list
without erasing the original information�
NOTE
•
This function is for Antenna mode only�
E Analogue Manual Scan
You can search and store analogue TV channels
manually�
E DVB-T Signal Condition
You can monitor Antenna signal condition�
E DVB-T Single RF Scan
Antenna:
Highlight the RF Channel box, select a channel
number you prefer to scan�
E DVB-C Signal Condition
You can monitor Cable signal condition�
E DVB-C Single RF Scan
Cable:
Configure the Frequency, Modulation, and Symbol
Rate box to scan�
E DVB-S Signal Condition
You can monitor DVB-S signal condition�
E DVB-S Signal RF Scan
You can search the DVB-S channels manually�
E Antenna System
You can set the antenna system to use plural LNBs for
receiving several satellites
(
One LNB/ MiniDiSEqC/ DiSEqC1�0/ Single Cable)�
E Favourites CH
You can create a list of favourite channels�
E CH Skip
Allows you to skip one or more channels �
NOTE
• To watch the skipped channels, enter the channel
numbers by using the digit buttons on the remote
control or select from PR LIST
�
E CH Sort
Channel sort allows you to reorder the channels in the
PR LIST�
E CH Edit
Allows you to change the channel number or the
channel name�
• Channel: Enter a new channel by using the digit
buttons on the remote control�
• Channel Name: Press the digit buttons on the
remote control to rename the channel�
NOTE
• The new channel number you have entered can not
override the exist one�
E Clean CH List
Select to clean all the channels that stored in the
channel list�
Setup
Language
Select the menu display language�
View Mode
Change the video format to suit your content�
Time Setup
Set the current time and the sleep timer�
• Change Time zone
• Set Time
• Set Sleep Timer
Sleep Timer switches the TV to standby after a
defined period of time�
NOTE
• When you press any button on the remote control with
less than 3 minutes left in the countdown, Sleep Timer
will be automatically canceled�
To Next Page
Loading...
