Sharp LC-32LE355M - Initial Setup and Menu Navigation; Initial Auto Installation; Programme and Analogue Settings; General Menu Operation

7
Initial auto installation
When the TV powers on for the first time after purchase, the
initial auto installation wizard appears. Follow the menus and
make the necessary settings one after another.
1
Press POWER on the TV.
• The initial auto installation wizard appears.
2
Press
a
/
b
to select the desired language, and then
press ENTER.
3
Press
a
/
b
to select “Home” or “Store”, and then
press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto search.
NOTE
• Home mode: Settings are optimised for normal home viewing and
energy effi ciency.
• Store mode: Settings are designed for maximum impact in retail
store displays.
• To change the Store mode to Home mode, please refer to page 10
to reset the unit.
Selecting a preset AV mode
“AV mode” gives you several viewing options to choose from
to best match the system environment, which can vary due
to factors like room-brightness, type of programme watched
or the type of image input from external equipment.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Picture) and “ ” (Audio).
3
Press
a
/
b
to select “AV mode”, and then press
ENTER.
Selected item Description
STANDARD
For a highly defi ned image in a normally bright room.
MOVIE
For a movie.
PC
For PC (Available only when inputting an HDMI
or PC signal).
DYNAMIC
For a clear-cut image emphasising high contrast
for sports viewing.
DYNAMIC
(FIXED)
Changes the image and sound settings to the
factory preset values. No adjustments are allowed.
NOTE
• You can select a different AV mode item for each input mode.
(For example, select STANDARD for TV input and DYNAMIC for
VIDEO input.)
Menu operation
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select the desired menu. (Programme
setup, Picture, Audio, ECO, Setup, Option)
3
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item or adjust
the item to the desired level. Press ENTER if necessary.
Programme setup
H
Auto installation
You can run auto installation again, even after setting up the
preset channels.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Programme setup).
3
Press
a
/
b
to select “Auto installation”, and then
press ENTER.
If you have already set the password, enter it here.
• See page 9 for setting a password.
4
Press
a
/
b
to select the desired language listed on
the screen, and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
H
Analogue setting
You can reconfi gure the TV channel settings automatically or
manually using Auto search or Manual adjust.
Auto search
Use this menu to add new services automatically after “Auto
installation” has been completed.
Auto search will memorise channels available at that time.
1
Repeat steps 1 and 2 in Auto installation.
2
Press
a
/
b
to select “Analogue setting”, and then press
ENTER.
3
Press
a
/
b
to select “Auto search”, and then press ENTER.
If you have already set the password, enter it here.
• See page 9 for setting a password.
You do not need to do anything during the auto
search. Press MENU to exit.
Manual adjust
You can set some channel items manually.
1
Repeat steps 1 and 2 in Auto search.
2
Press
a
/
b
to select “Manual adjust”, and then press
ENTER.
If you have already set the password, enter it here.
• See page 9 for setting a password.
3
Press
a
/
b
to select your desired item, and then press
c
/
d
to adjust the settings.
Item Description
Storage to
[1~99]
Save programme to your desired channel
number. Press R to save.
Sound
system
Select the optimum sound system (Broadcasting
system) to receive.
(B/G, D/K, I, M)
Colour
system
Select the optimum colour system to receive.
(PAL, SECAM, NTSC)
Current CH
Select the channel you want to edit.
• Selected channel will be automatically
refl ected in the background.
Search
Start searching from current channel.
• Instead of pressing
c
/
d
to adjust the
frequency, you can set by directly entering the
frequency number of the channel with 0 — 9.
Press R to save.
Fine-tune
Tune the frequency of the stored channel to
your desired position.
• Adjust while checking the background
picture as a reference.
Press R to save.
LC32LE355M_EN_A5.indd 7LC32LE355M_EN_A5.indd 7 6/24/2013 3:29:14 PM6/24/2013 3:29:14 PM