Sharp LC-40CFE6241K User Manual

12
Volume up and menu right
Volume down and menu left
Programme/channel up and menu up
Programme/channel down and menu down
Displays menu/OSD
Displays the ‘Input Source’ menu
Standby power On/Off
1
2
3
4
5
6
7
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
An example of the ‘Input Source’ menu
(will vary by model)
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between
input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to
the input/source you require.
3) Press Vol+ to change input/source to the
one selected.
For further information on input/connections please
view ‘Connections’ pages.
TV Buttons and Input Source Menu
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:12User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:12 20/08/2015 14:04:0120/08/2015 14:04:01

Sharp LC-40CFE6241K Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	280 cd/m²
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	1000000:1
Display diagonal (metric)	100 cm
Motion interpolation technology	Active Motion 400
3D	No
Supported file systems	FAT16, FAT32, NTFS
Annual energy consumption	66 kWh
Tuner type	Analog & digital
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-T, DVB-T2
Video apps	YouTube
Lifestyle apps	Facebook, Twitter
Audio decoders	DTS, Dolby Digital, DTS TruSurround
RMS rated power	8 W
Number of speakers	2
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Consumer Electronics Control (CEC)	Aquos Net+
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Teletext function	-
Audio formats supported	AAC, AC3, EAC3, M4A, MP3, WMA
Image formats supported	BMP, JPEG XR, JPG, PNG
Video formats supported	ASF, AVI, FLV, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, TS, VOB, WMV
Product color	Black
Panel mounting interface	400 x 200 mm
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	80 W
Power consumption (standby)	0.5 W
Power consumption (typical)	65 W

Weight and Dimensions

Depth (with stand)	202 mm
Width (with stand)	961.8 mm
Height (with stand)	569.1 mm
Weight (with stand)	7600 g
Depth (without stand)	67.1 mm
Width (without stand)	916.8 mm
Height (without stand)	532.9 mm
Weight (without stand)	7300 g