Sharp LC-40CFE6241K - Attaching;Detaching the Stand

9
9
Attaching/detaching the stand
ATTACHING THE STAND
(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then
fi x the stand/feet shown. The feet are
marked L (left) and R (right).
(fi g.2) Secure the stand/feet to
the underside of the TV set using
the 4 screws provided.
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
L
R
4 x
3
4
1
2
L
R
1
2
3
(fi g.2) When the stand feet are
installed correctly, the stand/feet
will be angled away from each
other at the front of the TV set.
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
TV panel must be facing downwards.
Screws that are included.
4 x
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:9User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:9 20/08/2015 14:04:0020/08/2015 14:04:00