34
LC-40LE732
LC-46LE732
10. INPUT MODE FIXED [VARIABLE → FIXED]
“FIXED” has been selected, any channels and input modes other than those selected at the start mode cannot
be picked up.
11. INPUT TV MODE PROGRAM NUMBER [1-999]
When any other item than “NORMAL”, i.e. number, has been selected, and “INPUT MODE START” option is
set to “TV”, the sets will start in the selected service / program number at the next power-on.
12. RC PATH THROUGH [ON ↔ OFF]
When ON and RS-232 circuitry is really assembled , in pin #9 of RS-232 socket appears a feedback of
the remote signal (3.3v logic type).
13. HOTEL MODE [ON ↔ OFF]
If ON has been selected the HOTEL MODE is activated.
14. RESET
Cancel all Public Mode settings. (It returns to the factory settings)
15. COMMIT
Press OK to select this item, or press cursor RIGHT / LEFT keys on the remote control to apply the change.
If “YES” is selected the change will be stored and the TV set will be reset.
2. Public Mode Settings (continued)
To Next Page
Loading...
Need help?
General