33
LC-40LE732
LC-46LE732
1. How to Enter in the Public Mode (Hotel Mode)
There are two following ways to display the Public Mode setting screen.
Method 1:
Turn on the power and enter in the Service mode as usual and select line 8 [PUBLIC MODE].
Method 2:
Unplug the AC power cord.
Plug the AC power cord. When the LED light blue, press “VOL+” and “b” keys at the same time.
Then, when you are asked for the password, enter “0027”.
After this sequence the TV will turn on showing the Public Mode setting screen. In another case, the screen is
erased, and it operates in the ordinary mode.
2. Public Mode Settings
1. POWER ON FIXED [VARIABLE↔FIXED]
When it is set to “FIXED” the TV is impossible to be switch off by Main Switch or Remote Control.
2. MAXIMUM VOLUME [0 ↔ 60]
Is possible to set the maximum volume at limited level.
3. VOLUME FIXED [VARIABLE ↔ FIXED]
Is possible to fi x the sound volume at limited level.
When “FIXED” is selected the sound volume before limited is fi xed.
4. VOLUME FIXED LEVEL [0 ↔ 60]
If “FIXED” has been selected, is possible to set a fi xed volume at the level that is chosen.
5. RC BUTTON [RESPOND ↔ NO RESPOND]
If “NO RESPOND” is selected, the remote control keys are inoperative.
6. PANEL BUTTON [RESPOND ↔ NO RESPOND]
If “NO RESPOND” has been selected, the set’s keys remain deactivated (Except POWER key).
7. MENU BUTTON [RESPOND ↔ NO RESPOND]
If “NO RESPOND” has been selected, “MENU” key, of remote control, is inoperative.
8. ON SCREEN DISPLAY [On ↔ Off]
If “OFF” has been selected, the On Screen Display does not appear.
9. INPUT MODE START [ DTV → ATV → AV → SCART-AV → COMPONENTS → PC-RGB → HDMI1 →
HDMI2 → HDMI3 → HDMI4 ]
When any other item than “NORMAL” has been selected, the sets will start in a selected input mode at
the next power-on.
PUBLIC MODE
To Next Page
Loading...
Need help?
General