Sharp LC-40LX810E - Removing 40 LCD Panel Module Unit

LC-40/46LE810E, LC-40/46LX810E
4 – 3
3. Removing of 40” LCD Panel Module Unit, TOUCH SENSOR Unit, ICON Unit, R/C, LED Unit, Front Cabinet
Ass’y.
1. Disconnect RA, SB wire.
2. Detach the TOUCH SENSOR Unit . (RK)
3. Detach the ICON Unit . (RI)
4. Detach the R/C, LED Unit . (RA)
5. Remove the 1 lock screw and detach the LCD Angle (Bottom-R) .
6. Remove the 5 lock screws , 3 lock screws , 4 Hooks and detach the 40” LCD Panel Module Unit .
NOTE: The TOUCH SENSOR Unit removed once is not reusable.
2 ICON Unit
3
R/C, LED Unit
1 TOUCH SENSOR Unit
9
40" LCD Panel Module Unit
Front Cabinet Ass'y
6
7
7
6
6
6
8
8
8
8
6
4
[RI]
[RK]
[RA]
[RA]
[SB]
5
LCD Angle
(Bottom-R)
[SB]