FRANÇAIS ESPAÑOL
Audio Menu
You can adjust:
Sound Mode:
Select the Sound Mode: Standard, Theater,
Music, Speech or Custom.
Balance:
Adjust the volume of the left and right speakers.
Equalizer:
Soften or enhance the sound at specific frequency
points.
Auto Volume Control:
Automatically adjusts volume to a
consistent level; attenuates loud passages.
TV Speakers:
Selects where to play TV audio. You can select
On (default setting) to play audio through TV speakers, or select
Off to play audio through the speakers on an external audio system.
Advanced Audio Settings:
Access Advanced Audio settings such as Digital Audio Out, MTS / SAP, Audio
Language.
•
Digital Audio Out:
Send digital audio to an external audio system. You can select PCM or RAW.
PCM:
PCM outputs two channel audio regardless of the input format.
RAW:
When the data stream carries Dolby signal,
digital SPDIF outputs Dolby data stream. When the
data
stream carries no Dolby signal, it transports PCM
data stream.
•
MTS / SAP :
Select the default audio stream, you can select Mono, Stereo or SAP (Second Audio Program).
Mono:
Select this option if there is noise or static on weak stereo broadcasts.
Stereo:
Select this option for programs broadcast in stereo.
SAP:
Depending on the particular program being broadcast, you can listen to a foreign-language translation.
NOTE
• Only available in Analog channels.
•
Audio Language:
Change the default value for audio language.
NOTE
• Only available in Digital channels.
Reset Audio Settings:
Resets all audio settings to the factory defaults.
ENTER MENU
EXIT
Enter Select Previous Exit
Adjust settings to affect sound quality
Audio
Sound Mode Standard
Balance 0
Equalizer
Auto Volume Control On
TV Speakers On
Advanced Audio
Reset Audio Settings
To Next Page
Loading...
Need help?
General
