EasyManua.ls Logo

Sharp LC-42XL2S - Page 111

Sharp LC-42XL2S
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
4 – 13
<External input EXT1,EXT2> No picture on the display (6)
Does not the picture of the Y/C video signal input to EXT1 go out?
Does not the picture of the Y/C video signal input to EXT2 go out?
TERMINAL UNIT:
<EXT1>
Is Y/C video signal sent to pins (20) and (15) of SCART1
(SC502)?
NO Check the setting of an external input device that connects of
SC502.
<EXT2>
Is Y/C video signal sent to pins (20) and (15) of SCART2
(SC503)?
NO Check the setting of an external input device that connects of
SC503.
YES
<EXT1>
Is Y/C signal sent to pins (67), (69) of IC506?
NO Check the line between SC502 and IC506.
<EXT2>
Is Y/C signal sent to pins (73), (75) of IC506?
NO Check the line between SC503 and IC506.
YES
Is Y/C signal output to pin (2), (4) of connector SC501 from pin
(52/Y), (50/C) of IC506?
NO Check the line between IC506 and SC501.
MAIN UNIT: YES
Is Y/C signal sent to pins (2), (4) of connector (SC1101)? NO Check the connector (SC501/SC1101)
YES
Is Y/C signal sent to pins (Y4), (V9) of IC3301
(VIDEO_PROCESSOR)?
NO Check the line between SC1101 and IC3301.
YES
Refer to “The picture doesn't appear in all modes.”

Table of Contents

Related product manuals