EasyManua.ls Logo

Sharp LC-42XL2S - Page 113

Sharp LC-42XL2S
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LC-42XL2E/S/RU, LC-46XL2E/S/RU, LC-46X20E/S/RU, LC-52XL2E/S/RU, LC-52X20E/S/RU
4 – 15
<When EXT3 is used for external input> No picture on the display (8)
Does not the picture of the Y/C video signal input to EXT3 go out?
MINI AV_UNIT:
Is Y/S signal input into pin (13), (11) of connector P901 from pin
(3)/Y, (4)/C of J902?
NO Check the line between J901 and P901.
TERMINAL UNIT: YES
Is Y/C signal input into pin (5), (7) of IC506 (VIDEO SELECTOR)
from pin (13)/Y, (11)/C of connector P501?
NO Check the line between P501 and IC506.
(Connector P901/P501, etc.)
YES
Is the Y/C video signal detection function S3_PLUG signal from
pin (6) of the input terminal J902 normal?
NO Check J902 or peripheral circuits.
YES
Is the S3_PLUG signal input to pin (42) of IC506? NO Check the between S3_PLUG_LINE J902 and pin (42) of TER-
MINAL UNIT’s IC506. (connector P901/P501, etc.)
YES
Is Y/C signal output into pin (2), (4) of connector SC501 from pin
(52)/Y, (50)/C of IC506?
NO Check the line between IC506 and SC501.
MAIN UNIT: YES
Is Y/C signal input to pin (2), (4) of connector SC1101? NO Check the connector (SC501/SC1101)
YES
Is Y/C signal input to pin (Y4), (V9) of IC3301
(VIDEO_PROCESSOR)?
NO Check the line between SC1101 and IC3301.
YES
Refer to “The picture doesn’t appear in all modes.”

Table of Contents

Related product manuals