50
LC-50LB261U Sharp 50" LED TV
www.sharpusa.com
• Contrast—Adjusts the brightness of the light
areas of the picture.
• Color—Adjusts the color intensity of the picture.
A low setting may make the color look faded. A
high setting may make the color look artificial.
• Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
• Sharpness—Adjusts the color detail of images.
If you set this control too high, dark images may
appear with light or white edges.
• Advanced Settings—Opens the
PICTURE · ADVANCED SETTINGS menu where you
can adjust additional video options.
• View Mode—Adjusts how the picture fills
the screen (aspect ratio). You can select:
• Overscan—Extends text and images past
the screen edges to hide edge artifacts. You
can select On or Off.
• Active Backlight—Enhances the contrast
ratio between light and dark areas of the
picture. You can select On or Off.
• Motion Enhancement—Reduces motion
blur and eliminates film judder with clear
detail and smooth motion. You can select
Off, On(Low), On(High), or Film Mode.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Off, Low, Middle, or
High.
• Active Contrast—Automatically adjusts
picture detail and brightness. You can select
On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
W or X to adjust the option, or press S or T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Aspect ratio options Example
Normal:
Displays the image in the original
aspect ratio. Black bars appear if the
image is not in the widescreen (16:9)
aspect ratio.
Zoom:
Expands the image to fill the screen.
The top and bottom of the image may
be cropped.
Wide:
Use this option to view content
recorded in a 16:9 (widescreen) aspect
ratio.
Cinema:
Stretches the image at the edges, but
keeps a clear image in the center.
Auto:
Automatically adjusts the image based
on the screen size and the TV program.
Note: Auto is only available when
Auto View Mode in the CHANNELS
menu is set to On.
Note
You can also press VIEW MODE to select
the aspect ratio.