Sharp LC-60E77UN - Page 25

LC-60E77UN/LC-65E77UM/LC-C6077UN/LC-C6577UM
4 – 12
6. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Sheet suppression Angle (L/R,
Top/Bottom), LCD Control Unit, INVERTER-1/2/3/4/5/6 and BL Chassis Ass’y.
1. Remove the 26 lock screws and detach the Bezel Ass’y .
2. Remove the 2 lock screws and detach the 2 Panel Guide Ass’y .
3. Remove the 26 lock screws and detach the Panel Chassis Ass’y .
4. Detach the 2 Lens Sheet and Diffusion Plate .
5. Remove the 8 lock screws and detach the 2 Sheet suppression Angle (L/R) and 2 Sheet Suppression Angle (Top/Bottom) .
6. Remove the 6 lock screws and detach the 2 Lamp Holder .
7. Detach the 72 Socket and detach the 36 Lamp .
8. Detach the Reflected Sheet .
9. Remove the 5 lock screws and detach the LCD Control Unit .
10.Remove the 29 lock screws and detach the INVERTER-1 Unit , INVERTER-2 Unit , INVERTER-3 Unit , INVERTER-4 Unit ,
INVERTER-5 Unit , INVERTER-6 Unit .
11.Detach the BL Chassis Ass’y .
26
23
19
18
20
17
24
25
21
22
19
13
14
16
12
13
14
15
1
10
5
3
6
2
11
4
9
10
11
8
7
BL Chassis Ass'y
LCD
Control Unit
INVERTER-1 Unit
INVERTER-4 Unit
INVERTER-5 Unit
INVERTER-6
Unit
INVERTER-2 Unit
INVERTER-3 Unit
Lamp Holder
Reflected Sheet
Lamp Holder
Socket
Socket
Lamp
Sheet suppression Angle(L/R)
Sheet suppression
Angle(L/R)
Bezel Ass'y
Panel Chassis Ass'y
Sheet suppression Angle(Top/Bottom)
Sheet suppression Angle(Top/Bottom)
Diffusion Plate
Lens Sheet