Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See page 16.)
For connecting the TV to external equipment, use commercially available cables.
, The illustrations of the terminals are for explanation purposes and may vary slightly from tile actual products.
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefWly before making connections.
[] Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VOR, Game Console or Cameorder
Terminalon external Cable Terminalon the TV
equipment
HD
Quality
®
DV_OUT AUD]OOUT
co_pONENT0_f
L® ®.
AUDIO OUT
iiiiiiiiiiiiiiiii!i_
® L® ®R
VIDEO OUT AUDIO OUT
Standard
Quality
;q_c_--,_ HDMI certified cable
DVI HDMI conversion cable
o 3.5 mm stereo minijack cable
Component video cable
_q_-_ Audio cable _<:d"P
AV cable
NDMmmN1,2or 3 Hi.rift1 IN "1
*2
*3
_,o
AUDIO [N
®
COMPONENT mN *3
®_
AUDIO
VIDEO mN @
AUDI / IN
@ L
@VIDEO IN
"1 Supported Audio format: Unear PCM, sampling rate32/44.t/48kHz.
*2 When using a DVFHDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVl HDMI conversion cable to the HDMI IN I terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO
iN terminal and set "PC Audio Select" to "HDMI1 ". (See page 21.)
*3 To enjoy 1080p display capability, connect your external equipment using an HDMI certified cable or a component cable and
Cable
Optical fiber cable
Audio cable
:°_,h
Terminalon the TV
DIGmTALAUDIO *4
OUT
IGI;A
AUDIO
*5
AUDIO OUT AUDIOOm
@ @
set the equipment to 1080p output.
[] Connecting an Audio Amplifier
Terminalon external
equipment
AUDIO iNPU1
*4 The DIGITAL AUDIO OUT terminal does not output the audio signals from external equipment connected to the HDMI IN
terminals. In this case, make analog audio connections to the AUDIO OUT terminals.
*5 See page 25 for details on the Output Select function.
[] Connecting a PC
Terminal on PC
ANALOGRGB
®
AUDIO OUT
i,,li311rl i
®
DV] OUT AUDIO OUT
Cable
Analog RGB cable (D-sub 15-pin cable orVGA cable)
o 3.5 mm stereo minijack cable
_m m_
/_/J:L:,_-_ HDMI-certified cable
;:i_"" "" DVI-HDMI conversion cable
e 3.5 mm stereo minijack cable
Terminal on the TV
_,o
AUDIO IN ®
HDMI IN 1, 2 or 3 _mn IN
*_,o
AUDIO IN
®
*6 When connecting a PC to the PC IN, set "PC Audio Select" to "PC iN". (See page 21.)
*7 Depending on the board, only video signals may be output. [n this case, in addition to connecting an HDMI certified cable
to the HDM[ IN I terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO iN terminal and set "PC Audio Select" to
"HDMI1 ". (See page 21.)
The HDM[ [N terminals one/support digital signal.
Refer to page 28 for a list of PC signals compatible with the TV.
12
To Next Page
Loading...
