18
LC-60LE635
LC-60LE638
5. Remote control key operation and description of display in adjustment process mode.
1. key operation
Remote control key Keyboard unit Function
CH keys (
r/s) CH (r/s) Moving an item (line) by one (UP/DOWN)
VOL keys (+/-) VOL (+/-) Changing a selected item setting (+1/-1)
Cursor (▲ /▼ ) - Turning a page (PREVIOUS / NEXT)
Cursor (◄/►) - Changing a selected line setting (+10/-10)
b
INPUT Input source switching (toggle switching) (TV→EXT1→ etc...)
OK - Executing a function.
RETURN - Returning to a present page.
The required input mode should be switched previously to enter the Service Mode.
CAUTION: Use due care in handling the information described here lest the users should know how to enter the adjustment
process mode. If the settings are tampered with in this mode, unrecoverable system damage may result.
6. Description of display
(1) Current page / number of total pages (4) Inducing display
(3) Present colour system
(2) Input that has been selected now (5) Inch setting and Model name display
1/23 INPUT 1 AUTO EURO xxxxx
No. Description Display specifi cation
(1) Present page/number of total pages 2char/2char Decimal Number mark.
(2) Input that has been selected now TUNER/DTV/INPUT1/INPUT2/INPUT3/INPUT5/INPUT6/INPUT7/etc...
(3) Present colour system AUTO/N358/N443/PAL/SECAM/480i/580i/1080i/50 etc…
(4) Inducing display EUROPE / RUSSIA / SWEDEN
(5)
Inch setting and Model name display
Inch setting and Model name display
(6) Item name Max. 30 char
(7) Parameter Max. 60 char
(7) Parameter
(6) Item name
Main Version 1.00 (E2011/**/**)
BOOT Version xxxxxxx
Monitor Version xxxxxxx
T-CON Version/LED CON Version xxxxxxxx/xxxx
NET TV KEY / MAC xxxxxxx
CI+INFO/SECURE BOOT xxxxx/YES
FRC Version xxxxxxx
TOUCH SENSOR/IR Micom Version xxxxxxx
LAMP ERROR 0
MONITOR ERR CAUSE 1) xxxxxxx 2) xxxxxxx
3) xxxxxxx 4) xxxxxxx
NORMAL STANDBY CAUSE 0
ERROR STANDBY CAUSE 0 0 0 0
To Next Page
Loading...
Need help?
General