EasyManuals Logo

Sharp LC-60LE660U User Manual

Sharp LC-60LE660U
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
LC-60/70LE660U,C6600U
5 – 11
10. Key writing
10.1. MAC key writing (MAIN PWB: QPWBXG460WJ**)
10.2. Netflix, PlayReady key writing (MAIN PWB: QPWBXG460WJ**)
10.3. WideVine key writing (MAIN PWB: QPWBXG460WJ**)
10.4. Update Logic Serial No. writing (MAIN PWB: QPWBXG460WJ**)
10.5. HDCP1.4 key writing (MAIN PWB: QPWBXG460WJ**)
11. Factory setting
After completing the factory setting, pull out the AC cord to complete the setting.
CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again.
12. Software version
1. Main microprocessor
BUFF_C_104.img
2. T-CON ROM
APRICOT_****************.ROM
Adjustment point Adjustment conditions Adjustment procedure
1 Factory setting Complete the setting by
pulling out the AC cord.
Point the cursor to [INDUSTRY INIT (+Cause)], set to “ON” using [+]/[-] of the [VOL]
key, and press the [ENT] key.
The version confirmation screen appears on the green screen. It is completed when
[SUCCESS] is displayed at the top.
(If error occurs, [ERROR] is displayed on the red screen.)
Turn off the AC power.
The following items are initialized when configuring the factory setting.
1) User set value
2) Channel data (broadcasting frequency, etc.)
3) Operating time
4) Password setting value
5) V-CHIP block setting value

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-60LE660U and is the answer not in the manual?

Sharp LC-60LE660U Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal60 \
Display brightness- cd/m²
Native aspect ratio16:9
Native refresh rate120 Hz
LED backlighting typeEdge-Lit LED
Contrast ratio (dynamic)4000000:1
Supported graphics resolutions1920 x 1080 (HD 1080)
Motion interpolation technologyAquoMotion 240
3DNo
Teletext function-
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power20 W
Number of speakers2
HDMI ports quantity3
DVI-D ports quantity0
USB 2.0 ports quantity1
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
On Screen Display (OSD) languagesENG, ESP, FRE
Product colorBlack
Panel mounting interface400 x 400 mm
AC input voltage110 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Package depth200 mm
Package width1521 mm
Package height949 mm
Package weight31700 g
Sustainability certificatesENERGY STAR
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)343 mm
Height (with stand)824 mm
Weight (with stand)24600 g
Depth (without stand)86 mm
Width (without stand)1355 mm
Height (without stand)781 mm
Weight (without stand)22800 g

Related product manuals