EasyManua.ls Logo

Sharp LC55UB30U - User Control Panel Functions

Sharp LC55UB30U
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONFIDENTIAL – DO NOT COPY
Page 3-2
File No. SG-0000363
i. Power Off
When power is off and the Side button is pressed, upon press (not release) of the Side button,
the TV is immediately powered on. Long and short key presses do not apply when power is off
at the time of the key press.
ii. MENU
Press MENU button to activate the OSD. Press this button again to exit.
iii. Channel selection
By operating the and buttons, channel should be selected. At the time, channel should increase
With
button and decrease with button. When the “MENU” is activated, it can be navigated up
by
button and down by button.
iv. Volume Adjustment
By operating the VOL+ and VOL- buttons, volume should be available to change from minimum
to maximum. At the time, volume should increase with VOL+ button and decrease with VOL- button,
and volume shift should be smooth. When the OSD is activated, it can be navigated left
and right by operating these two buttons.
v. Input Change/Confirmation
This button allows the user to cycle through the input sources in the following sequence: TV,HDMI1
HDMI2, HDMI 3, HDMI 4, COMPONENT,VIDEO,
HOME Network (DLNA), USB, Miracast
When the OSD is activated, the option can be confirmed pressing this button.

Related product manuals