EasyManua.ls Logo

Sharp MD-MT190H - Preparation for Use; Inserting a MiniDisc

Sharp MD-MT190H
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01/10/29 MD-MT190H(SEEG)_2.fm
E-9
MD-MT190H
ENGLISH
Preparation
-Inserting a MiniDisc-
Inserting a MiniDisc
Notes:
Do not place the MiniDisc under the holder.
If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resis-
tance is felt, remove the MiniDisc and reload it.
The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 13.
Recording
prevented
Recordable
When you record on a MiniDisc,
check that the erase prevention
tab is set to the "Recordable"
position.
1
Slide the OPEN lever to release the compart-
ment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.

Related product manuals