Sharp MD-MT190H - Playback Operations

01/10/29 MD-MT190H(SEEG)_3.fm
E-14
MD-MT190H
ENGLISH
Basic Operation
-Playback-
Playback
To interrupt playback
Press the button.
To resume playback, press the button again.
To stop playback
Press the :OFF/HOLD button.
If the unit is not operated for at least 2 minutes whilst in
the stop mode, the power will shut off automatically.
To turn off the power
Press the :OFF/HOLD button whilst in the stop mode.

Volume control
Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.
L
R
To the
REMOTE socket
Right
channel
Left
channel
1
Insert the earphones plug firmly into the ear-
phones socket on the remote control unit.
2
Plug the remote control into the REMOTE sock-
et on the unit.
3
Insert a MiniDisc (page 9).
4
Press the button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
Volume (0 - 30)