01/10/29 MD-MT190H(SEEG)_2.fm
E-10
MD-MT190H
ENGLISH
Preparation
-Connections-
Connections
You can record your favourite CDs or tapes to MD.
When recording, it is recommended to use the AC adaptor and also install the battery. Should the power failure occur, the power
source would be automatically switched to the battery.
DIGITAL OUT
RIGHT
LEFT
■
To connect to a stereo system with "LINE OUT" or "AUDIO OUT" sockets
(Analogue connection)
To the wall socket
Red : To Right
White : To Left
Supplied
connection
cable
■ To connect to a stereo system with a "DIGITAL OUT" or
"OPTICAL OUT" socket (Digital connection)
Compared to analogue connection recording,
it allows high-quality recording.
Some audio systems do not have a DIGITAL OUT socket.
Check before connecting.
If the audio system has only one pair of sockets, they are usually
for input only and recording via this connection is not possible.
AC 230V,
50/60Hz
Supplied
connection cable
To the DC IN
5V socket
To the LINE IN/
OPTICAL socket
To Next Page
Loading...
