Sharp MD-MT280E - Using with the Alkaline Battery

03/1/16 MD_MT280E_UK_2.fm
10
MD-MT280E
Power Source
-Using with the Alkaline Battery-
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6,
"AA" size).
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery according to the
direction indicated in the battery compart-
ment.
4
Close the battery cover.
Caution:
!
Do not replace the battery during operation.
!
Do not use a rechargeable battery (nickel-cad-
mium battery etc.).
!
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
!
Installing the battery incorrectly may cause the unit to
malfunction.
Notes:
!
For information about the battery life, see "Specifica-
tions" on page 49.
When inserting or removing the battery, push it to-
wards the battery terminal.
43
21
!
When the battery cover comes off, attach the cover
back as shown below.
1
2