Sharp MD-MT280E - Troubleshooting

03/1/16 MD_MT280E_UK_6.fm
46
MD-MT280E
References
-Troubleshooting-
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to
be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.
"
Is the AC adaptor disconnected?
"
Is the battery exhausted?
"
Is the unit in the hold mode?
"
Has condensation formed inside the unit?
"
Is the unit being influenced by mechanical shock or
by static electricity?
No sound is heard from the earphones.
"
Is the volume set too low?
"
Are the earphones plugged in?
"
Are you trying to play a MiniDisc with data on it in-
stead of a MiniDisc containing music?
When the operation buttons are pressed, the unit
does not respond.
"
Is the unit in the hold mode?
"
Is the battery exhausted?
"
Is the earphones plug inserted firmly?
Some sounds are skipped.
"
Is the battery exhausted?
"
Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.
"
Has the track number or character information been
written on the disc yet?
"
Is the unit in the recording or editing mode?