Sharp MD-MT280E - Powering the Device; Using with the AC Adaptor

03/1/16 MD_MT280E_UK_2.fm
9
MD-MT280E
1
2
3
4
5
6
Power Source
-Using with the AC Adaptor-
Using with the AC Adaptor
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 5V socket.
Caution:
!
Insert the plugs firmly.
!
When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Notes:
!
If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
!
This unit can be used with the AC adaptor when an
alkaline battery is in the unit.
To the DC IN 5V socket
AC 230V,
50/60 Hz