Sharp MD-MX30H

38
■ To change disc names and track names
● To add a character:
(Example: To change "BET" to "BEST")
1 To change disc names, perform steps 1 - 3 on page 36.
To change track names, perform steps 1 - 2 on page 37.
2 Press the
3 3
3 3
3 or
2 2
2 2
2 button to flash the character at
the place you want to add a letter.
DISC
● To cancel the operation, press the MD ■ button.
3 Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
DISC
DISC
● The selected character will be added, and the original char-
acters will move to the right by one.
4 After entering all of the characters in the name, press
the NAME/TOC EDIT button.
Note:
● You cannot modify disc or track names created on other
equipment if they are over 40 characters.
In this case, erase the name and then enter a new name.
● To delete a character:
(Example: To change "BESUT" to "BEST")
1 To change disc names, perform steps 1 - 3 on page 36.
To change track names, perform steps 1 - 2 on page 37.
2 Press the
3 3
3 3
3 or
2 2
2 2
2 button to flash the character to
erase.
DISC
● To cancel the operation, press the MD ■ button.
3 Press the TIMER/DELETE button.
DISC
● After this step, if you are not going to enter a character, go
to step 5.
4 Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
● The selected character will be added, and the original char-
acters will move to the right by one.
5 After entering all of the characters in the name, press
the NAME/TOC EDIT button.
(Continued)
NAME/TOC EDIT
MEMORY/
ENTER
Jog dial
MD ■
32
TIMER/DELETE
*36-43 00.1.13, 0:03 PM38