Sharp MD-MX30H

45
■ Listening to sound from an external unit
To listen to sound from an external unit connected to the ana-
logue input terminals:
■ Manual recording
You can start a recording manually whilst listening to play-
back from other external equipment (tape deck, tuner) con-
nected to the auxiliary input.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the AUX button.
3 Start playback on the external unit, and adjust the in-
put sound level using the
33
33
3 or
2 2
2 2
2 button.
● Adjust the recording level so that the "OVER" indicator
does not light at the maximum level.
OVER
-2 0 +4
4 Adjust the sound level using the VOLUME buttons on
the remote control or the VOLUME control on this main
unit.
1 Press the ON/STAND-BY button to turn the power on.
2 Load a recordable MiniDisc.
3 Press the AUX button.
4 Press the
I I
I I
I REC button.
5 Start playback on the external unit.
6 Adjust the recording level using the
33
33
3 or
2 2
2 2
2 but-
ton.
● Adjust the recording level so that the "OVER" indicator
does not light at the maximum level.
OVER
-2 0 +4
7 Press the MD
0606
0606
06 button.
To stop recording:
Press the MD ■ button.
(Continued)
1
2
4
1
2
4
1
2
7
MD H
3
3
1
4
7
MD H
3
66
4
*44-46 00.1.13, 0:02 PM45