HOW TO CONNECT AND PAIR YOUR APPLIANCE TO THE SHARP KITCHEN APP
Scan this QR code or visit http://www.sharpusa.com/Support.aspx and
search for SMD2489ES or SMD2479JS on how to connect and pair your
appliance to the Sharp Kitchen App.
1. GETTING STARTED
• Download the Sharp Kitchen App on the App Store
®
or Google Play.
• Launch the Sharp Kitchen App and sign in or create a Sharp account.
*If you already have a Sharp account, enter credentials and select [SIGN IN].
Note: Easy Wave Open is OFF by default when plugged in.
If you do not have a Sharp account, select [CREATE ACCOUNT] and follow the on-screen
instructions. A verication email will be sent. Please verify email within 24 hours, otherwise
account registration will need to be restarted.
SHARP ELECTRONICS CORPORATION
3
HOW TO ACTIVATE EASY WAVE OPEN FUNCTION
EASY WAVE OPEN ON
• Hold on the control panel for 3 seconds. Once enabled,
the white light on the center of the panel will illuminate and the
display will show .
• To use the Easy Wave Open function, simply wave your hand
twice in front of the sensor in consecutive motions. This can be
up and down or side to side motions.
EASY WAVE OPEN OFF
• Hold on the control panel for 3 seconds. Once disabled, the white light on the
center of the panel will turn o and the display will show .
• When Control Lock is activated, the Easy Wave Open Function is o.
EASY WAVE OPEN ON
EASY WAVE OPEN OFF
Location of Easy Wave Open Sensor
QUICK START GUIDE
SMD2489ES & SMD2479JS
Microwave Drawer
™
To Next Page
Loading...
Need help?
General
