33
Using the internal fax/modem
You can use the internal fax/modem to perform fax and data transmission (9.6
kbps for fax and 33.6 kbps for data).
Connect the internal fax/modem to an analog telephone line as follows:
1. Use a finger to gently open the modem port.
2. Insert one end of the supplied modular phone cable into the modem jack.
3. Insert the other end of the modular phone cable into a telephone outlet.
Note:
• Before using the internal fax/modem for communication, check that it is set up in
Windows CE.
• The internal modem complies with the North American standards only.
To Next Page
Loading...