DOCUMENT FILING
53
Scan to USB memory device
1
Connect the USB memory device to
the machine.
2
When a screen for selecting the action
appears, tap [Scan to External Memory
Device].
• To select detailed settings in normal mode, select the
[Perform Detail Setting] checkbox .
► BASE SCREEN OF SCANNER MODE
(page 48)
• If the machine/device save screen is open, this screen will
not appear.
3
Tap the [Colour Start] key or [B/W
Start] key.
To check a preview of a document scanned on the
automatic document feeder, tap the [Preview] key.
► PREVIEW SCREEN
(page 14)
4
After scanning all originals, tap the
[Read-End] key.
When you scan the original using the automatic document
feeder, this screen does not appear.
5
Check the [Sending data has been
completed.] message, and remove the
USB memory device from the machine.
CLOUD PORTAL
Operation
Guide
Enlarge
Display Mode
Settings Total Count Brightness
Adjustment
Easy
Fax
Job Status
Print from external
memory device (USB)
Scan to External
Memory Device
Perform Detail
Setting
External memory device (USB) is connected.
10:15
To Next Page
Loading...
Need help?
General
