Sharp MX-4050N - Page 750

7-26
SYSTEM SETTINGS►SETTING MODE LIST
*1 This setting is configured in setting mode on the machine.
*2 This setting can be set in Server 1.
Common Settings
U: General user; A: System administrator/Administrator
• Timeout 20 seconds No Yes
Setup Items Factory default setting U A
l Common Settings (page 7-119)
 Paper Settings Yes Yes
 Paper Tray Settings Yes Yes
• Auto Switching of Tray Enabled Yes Yes
• Display Paper Tray Settings when bypass tray
detects paper.
Enabled Yes Yes
• Tray 1 When using the MX-5050N/
MX-5070N/MX-6050N/MX-6070N
Plain, Auto-AB (Auto-Inch)
When using the MX-2630N/
MX-3050N/MX-2630N/MX-3060N/
MX-3070N/MX-3550N/MX-3560N/
MX-3570N/MX-4050N/MX-4060N/
MX-4070N
Plain, A4 (8-1/2" x 11")
Yes Yes
• Tray 2
*1
Plain, Auto-AB (Auto-Inch)
Stand/550&2100 sheet paper drawer
Tray 3 Plain, A4 (8-1/2" x 11")
Tray 4 Plain, A4 (8-1/2" x 11")
Yes Yes
• Tray 3
*2
Yes Yes
• Tray 4
*3
Yes Yes
• Tray 5
*4
Plain, A4 (8-1/2" x 11") Yes Yes
• Bypass Tray Plain, Auto-AB (Auto-Inch) Yes Yes
 Custom Size Registration (Bypass) Custom 1 to 7
Auto-AB (Auto-Inch)
X=420mm (17") Y=297mm (11")
Yes Yes
 Paper Type Registration – Yes Yes
 Operation Settings No Yes
 Condition Settings No Yes
• Enlarge Display Mode Disabled No Yes
• Message Time Setting 6 sec. No Yes
• Language Setting Varies depending on country and
region
No Yes
• Default Display Setting Home Screen No Yes
• Display Favorite Menus as Default Disabled No Yes
• Display Action Panel as default. Enabled No Yes
Setup Items Factory default setting U A