7-31
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a stand/550 sheet paper drawer/low stand/550 sheet paper drawer/stand/2x550 sheet paper drawer/stand/3x550 sheet
paper drawer/stand/550&2100 sheet paper drawer is installed.
*2 When a stand/2x550 sheet paper drawer/stand/3x550 sheet paper drawer/stand/550&2100 sheet paper drawer is installed.
*3 When a stand/3x550 sheet paper drawer/stand/550&2100 sheet paper drawer is installed.
*4 When a large capacity tray is installed.
*5 When a facsimile expansion kit is installed.
*6 When an internet fax expansion kit is installed.
*7 When a saddle stitch finisher/saddle stitch finisher (large stacker) is installed.
*8 When a finisher (large stacker)/saddle stitch finisher (large stacker) is installed.
*9 When an inner finisher/finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is installed and a
punch module is installed.
*10 Can only be enabled on the MX-2630N/MX-3050N/MX-3550N/MX-4050N/MX-5050N/MX-6050N.
*11 This setting cannot be specified in some countries and regions.
• Disabling of Offset Disabled No Yes
• Disabling of Stapler
*7
Disabled No Yes
• Disabling of Punch
*9
Disabled No Yes
• Disabling of Master Machine Mode Disabled No Yes
• Disabling of Client Machine Mode Disabled No Yes
Security Settings No Yes
• Hidden Pattern Print Setting No Yes
- Disable Direct Entry Disabled No Yes
Machine Identification Settings – No Yes
Clock Adjust No Yes
Clock Adjust No Yes
• Current Date – No Yes
• Specify Time Zone – No Yes
• Date&Time Settings – No Yes
• Synchronize with Internet Time Server Disabled No Yes
Daylight Saving Time Setting Disabled No Yes
Date Format No Yes
• Current Setting – No Yes
• Format Varies depending on country and
region
No Yes
Product Key No Yes
Serial Number – No Yes
Font Kit for Barcode – No Yes
Internet Fax Expansion Kit
*6
– No Yes
Application Integration Module – No Yes
Direct Print Expansion Kit*
10
– No Yes
Application Communication Module
*10, *11
– No Yes
External Account Module
*10, *11
– No Yes
Custom Links – No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
