Sharp MX-4141N - Copy Operation Walkthrough; Placing Originals for Copying; Scanning, Previewing, and Editing Copies; Output Settings and Document Filing

MAINTENANCE
SHARP
14
Maintenance Indications:
DK
Black Drum Counter has reached the specified life.
Replace Black Drum
Process
Section
(Drum)
DC
Cyan Drum Counter has reached the specified life.
Replace Cyan Drum
DM
Magenta Drum Counter has reached the specified life.
Replace Magenta Drum.
DY
Yellow Drum Counter has reached the specified life.
Replace Yellow Drum.
VK
Black Developer Counter has reached the specified life.
Replace Black Developer.
Process
Section
(Developer)
VC
Cyan Developer Counter has reached the specified life.
Replace Colour
Developer Kit.
VM
Magenta Developer Counter has reached the specified life.
VY
Yellow Developer Counter has reached the specified life.
FK1
Fusing Belt Print Counter has reached the specified limit.
Replace the Fusing
Belt Kit.
Fuser
Section
FK2
Fuser Pressure Roller Print Counter has reached the
specified limit.
Replace the Pressure
Roller Kit.
FK3
Fuser Web Cleaner (Counter) has reached the specified
limit - (Pop Up FK3 Error – Web End Detected)
Replace the
Web Cleaning Kit
TK1
Primary Transfer Unit Counter has reached the
specified limit.
Replace Primary Transfer
Belt and Blade kits.
Transfer
Section
TK2
Secondary Transfer Unit Counter has reached the
specified limit.
Replace the Secondary
Transfer Belt Kit.
TK3
PTC Unit Counter has reached the specified limit.
Replace the PTC Unit
TA
Maintenance [All] Counter has reached specified limit
CA
Maintenance [Colour] Counter has reached specified limit
AA
Maintenance [All] & [Colour] Counters have reached the specified limits
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
Starting Powder
OPC Drum
Primary Transfer Belt
MX-4141N
MX-5141N
UKOG-0312FCZZ
[Stearic Acid]
CKOG-0345DS51 *
[Yellow Toner]
Note*: Kynar Powder [UKOG-0123FCZZ] can also be applied to the Primary Transfer Belt.
CAUTION:
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.