Sharpdesk Mobile Operation Manual
IV. The popup is displayed and the device is in the
waiting state.
12
Cop
yright © 2012 SHARP CORPORATION All rights reserved.
V.
Set the document on the scanner and
configure resolution, file format, color mode or
other settings.
Select the destination on “Address Book” in
“Fax/Image Send” so that the destination is the
same as “Display Name” configured in Chapter
5 of p
age 10, “Set up User Information.”
Push Start button on the scanner to execute
scanning.
VI.
Scanned data is sent to the device and the
device stores the data into the memory.
If multiple scanned data is received, the list of
scanned data is listed. Tap “Save” in the right
side of “Scan” title bar to store these data.
(note) Tap any data to preview received data from
the list. However, this data can only be stored
together with the rest of the received data.
To Next Page
Loading...
Need help?
General
