Sharpdesk Mobile Operation Manual
4
Cop
yright © 2012 SHARP CORPORATION All rights reserved.
2 Operational Environment
This application can be installed and used on the following environments (note 1).
iPhone 4, iPhone 4S, iPad, iPad 2 (for the operation on iPhone 4 and iPhone 4S, see Operation Manual
for iPhone)
iOS version: 4.3 or 5.0
(note 1) Your device is necessary to be connected to Wi-Fi network.
The following Sharp MFPs can be used to scan documents to / print documents from your mobile device
(note 2)(note 3):
MX-2310U (note 4), MX-3111U (note 4)
MX-2610N, MX-3110N, MX-3610N,
MX-4110N, MX-4111N, MX-5110N, MX-5111N
(note 2) Your MFPs are necessary to be connected to your network. PS3 Expansion Kit is also
necessary to be installed to print PDF files from this application.
(note 3) This application is not able to print if user authentication is enabled on your MFP.
(note 4) As for MX-2310U and MX-3111U, Printer Expansion Kit is necessary to be installed to print from
this application. PS3 Expansion Kit is also necessary to be installed to print PDF files from this
application.
This application can handle the following file formats (note 5):
JPEG, TIFF, PDF
(note 5) Maximum length of file names of these file formats that this application can handle depends on
the specification of iOS.
This application uses Bonjour, FTP and HTTP for searching MFPs on the network, receiving scanned
data from MFPs and printing to MFPs.
To Next Page
Loading...
Need help?
General
