Sharp MX-5112N

19
Automatic document feeder
Name
MX-4112N
Reversing Single Pass Feeder (MX-RP14)
MX-5112N
Duplex Single Pass Feeder (MX-EF10)
Document feeder types Reversing Single Pass Feeder (RSPF) Duplex Single Pass Feeder (DSPF)
Original paper sizes A3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Original paper types
Paper weight Thin paper 35 g/m
2
(9 lbs.) to 49 g/m
2
(13 lbs.)
Plain paper 50 g/m
2
(13 lbs.) to 128 g/m
2
(34 lbs.)
Two-sided 50 g/m
2
(13 lbs.) to 105 g/m
2
(28 lbs.) 50 g/m
2
(13 lbs.) to 128 g/m
2
(34 lbs.)
Paper storage capacity
100 sheets (80 g/m
2
(21 lbs.))
(or maximum stack height of 13 mm (1/2"))
150 sheets (80 g/m
2
(21 lbs.))
(or maximum stack height of 19.5 mm (50/64"))
Scan speed (copy)
B/W
Colour
51 sheets/minute (600 × 600 dpi)
51 sheets/minute (600 × 600 dpi)
75 sheets/minute (600 × 400 dpi)
51 sheets/minute (600 × 600 dpi)
 When scanning one-sided, A4 (8-1/2" × 11") horizontal documents
Tray
Name
Stand / 1 × 500
Sheet paper drawer
(MX-DE15)
Stand / 2 × 500
Sheet paper drawer
(MX-DE16)
Large capacity tray
(MX-LC11)
Paper sizes A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R) A4 (8-1/2" × 11"), B5
Useable paper 60 g/m
2
(16 lbs.) to 220 g/m
2
(59 lbs.)
60 g/m
2
(16 lbs.) to
105 g/m
2
(28 lbs.)
Paper capacity 500 sheets 500 × 2 3,500
Dimensions
MX-DE15 / MX-DE16
615 mm (W) × 670 mm (D) × 271.2 mm (H)
(24-39/64" (W) × 26-52/64" (D) × 10-55/64" (H))
MX-LC11
376 mm (W) × 523 mm (D) × 575 mm (H)
(15-13/32" (W) × 20-59/64" (D) × 23" (H))
Weight
MX-DE15: Approx. 18.5 kg (40.7 lbs.)
MX-DE16: Approx. 22.9 kg (50.38 lbs.)
MX-LC11: Approx. 30 kg (66 lbs.)
Finisher
Name Finisher (MX-FNX9)
Paper sizes Depends on feeder specications
Useable paper Paper weight 55 g/m
2
(15 lbs.) to 256 g/m
2
(68 lbs.)
No. of trays 1
Tray capacity (80 g/m
2
(21 lbs.))
Non-stapled A3 wide (12" × 18") / A3 (11" × 17") /
B4 (8-1/2" × 14"): 250 sheets
A4 (8-1/2" × 11") / A4R (8-1/2" × 11"R) / B5 /
B5R (7-1/4" × 10-1/2"R) / A5R (5-1/2" × 8-1/2"R):
500 sheets
Staple function A3 (11" × 17") / B4 (8-1/2" × 14"): 30 units or 250 sheets
A4 (8-1/2" × 11") / A4R (8-1/2" × 11"R) /
B5: 30 units or 500 sheets
 Offset output is not available for A3 wide (12" × 18") /
B5R (7-1/4" × 10-1/2"R) / A5R (5-1/2" × 8-1/2"R).
Max. no. of stapled sheets
(90 g/m
2
(24 lbs.))
Max. no. of 50 sheets (A4 (8-1/2" × 11"), A4R (8-1/2" × 11"R), B5)
Max. no. of 30 sheets (A3 (11" × 17"), B4 (8-1/2" × 14"))
Staple position 1 bottom, 1 top, 2 middle
Required power supply Supplied from this machine
Weight Approx. 13 kg (28.7 lbs.)
Dimensions
When output paper tray is stored
440 mm (W) × 595 mm (D) × 205 mm (H)
(17-21/64" (W) × 23-27/64" (D) × 8-5/64" (H))
When output paper tray is extended
640 mm (W) × 595 mm (D) × 205 mm (H)
(25-3/16" (W) × 23-27/64" (D) × 8-5/64" (H))
Exclusive stand
MX-DS15
Name Exclusive stand
Weight Approx. 11.8 kg (25.96 lbs.)
Dimensions
697 mm (W) × 670 mm (D) × 272.2 mm (H)
(27-57/64" (W) × 26-13/16" (D) × 10-57/64" (H))