How to fix Sharp All in One Printer printing on the wrong side of the paper?
If printing takes place on the wrong side of the paper, load the paper with the front side facing down in trays 1 to 4. For the bypass tray and trays 5, 6, and 7, load the paper with the front side facing up.
What to do if transmission does not take place on my Sharp All in One Printer due to file size?
If your administrator has set a limit on the size of transmitted files, a file that exceeds the limit cannot be transmitted. Check with your administrator. Reduce the size of the file attachment by reducing the number of pages scanned or by scanning using a lower resolution setting. You can also ask your mail server administrator what the file size limit is for one e-mail transmission. If the destination folder is not configured as a shared folder, select "share" in the folder properties. If the folder was moved or otherwise changed, the "share" setting may have been canceled.
What to do if my Sharp MX-5500N All in One Printer transmitted fax prints out blank at the receiving side?
Ensure the original is placed correctly (face up or face down, as required by the sending method) and send the fax again.
Why was I logged out of Sharp All in One Printer automatically?
When user authentication is used, the currently logged in user will be automatically logged out if Auto Clear activates. Log in again. If you are the administrator, you can change the time setting of Auto Clear or disable Auto Clear in 'Auto Clear Setting'.
Why Sharp All in One Printer paper does not feed from the paper tray?
If paper does not feed from the paper tray, ensure the paper is loaded correctly, with the guides set to the paper size and the height not exceeding the indicator line. Also, check the Paper Tray Settings in the system settings to see if there are restrictions on the trays that can be used in each mode.
How to fix part of the image being cut off on Sharp All in One Printer?
If part of the image is cut off, ensure the correct paper size is set, especially if using a special size. If using the document glass, place the original in the far left corner.
Why does Sharp All in One Printer leave smudges on printed output?
Smudges on printed output may occur if you are not using SHARP-recommended paper. Using unsupported paper can result in smudges. Also, if printing on pre-punched paper, the image may overlap the punch holes, causing smudges. If a message appears indicating the need for maintenance, contact your dealer or nearest SHARP Service Department as soon as possible.
How to fix lines in scanned images from Sharp All in One Printer?
If lines appear in the scanned image, clean the scanning areas of the document glass or automatic document feeder. Also, clean the surface of the bypass feed roller.
How to improve Sharp All in One Printer touch panel screen visibility?
If the touch panel screen is difficult to view, touch the brightness adjustment key on the system bar in the touch panel to adjust the brightness.
Why does auto selection of the color mode not take place correctly on my Sharp MX-5500N All in One Printer?
When the color mode is set to "Auto", the machine detects whether the original is black and white or color when the [START] key is pressed; however, automatic detection may not give the correct result. In this event, specify the color mode manually.
General| Brand | Sharp |
|---|---|
| Model | MX-5500N |
| Category | All in One Printer |
| Language | English |
To Next Page
