13
* Output capacity may vary depending on environmental conditions at the
installation location, the type of paper used, and the storage condition of the
paper.
Saddle Stitch
(MX-FN22)
Staple method
(for saddle stitch)
Centered fold with stapling in 2 center places
Saddle stitch fold position
Centered fold
Saddle usable sizes
13" x 19", 12" x 18", 11" x 17", 8-1/2 x 14", 8-1/2" x 11"R
(SRA3, A3 wide, A3, B4, A4R)
Saddle usable paper weight
16 lbs bond (60 g/m
2
) to 110 lbs cover (300 g/m
2
)
Paper weighting 28 lbs bond (106 g/m
2
) to 110 lbs cover
(300 g/m
2
) is only able to be used in cover mode and for
single sheet fold.
Max. no. of saddle-stitched sheets
Max. no. of 20 sheets (20 lbs (80 g/m
2
)):
19 sheets (20 lbs bond (80 g/m
2
)) + 1 sheet (110 lbs cover
(300 g/m
2
))
Required power
supply
AC 120V/2.9A ,60Hz
Weight MX-FN21: Approx. 134.5 lbs (61 kg)
MX-FN22: Approx. 238.1 lbs (108 kg)
Dimensions MX-FN21:
When output paper tray is stored
25-3/4" (W) x 30-1/8" (D) x 40-15/16" (H)
(654 mm (W) x 765 mm (D) x 1040 mm (H))
When output paper tray is extended
30-51/64" (W) x 30-1/8" (D) x 40-15/16" (H)
(782 mm (W) x 765 mm (D) x 1040 mm (H))
MX-FN22:
When output paper tray is stored
30-13/64" (W) x 30-1/8" (D) x 40-15/16" (H)
(767 mm (W) x 765 mm (D) x 1040 mm (H))
When output paper tray is extended
35-9/32" (W) x 30-1/8" (D) x 40-15/16" (H)
(896 mm (W) x 765 mm (D) x 1040 mm (H))
Punch Module
Name Punch module for
MX-FN34/35
MX-PN16B
Punch module for
MX-FN21/22
MX-PN13B
Paper size for
punch module
11" × 17" to 7-1/4" × 10-1/2"R (A3 to B5R)
Holes 2/3 holes (Auto select)
Required power
supply
Supplied from finisher/saddle stitch finisher
Dimensions - (Built into the Finisher and Saddle Stitch Finisher)
Weight Approx. 5.6 lbs. (2.5 kg) Approx. 8.6 lbs. (3.7 kg)
Paper Pass Unit
Name
Paper Pass Unit (MX-RB12 N)
Paper Pass Unit (MX-RB14)
Dimensions 21-5/8" (W) x 20-9/16" (D) x
5-61/64" (H)
(549 mm (W) x 522 mm (D) x
151 mm (H))
18" (W) x 29-59/64" (D) x
41-27/64" (H)
(457 mm (W) x 760 mm (D) x
1052 mm (H))
Weight Approx. 13.7 lbs (6.2 kg) Approx. 61.8 lbs (28 kg)
Relay Unit
Name Relay Unit (MX-RB13)
Dimensions 8-7/16" (W) x 29-59/64" (D) x 38-13/16" (H)
(214 mm (W) x 760 mm (D) x 986 mm (H))
Weight Approx. 33.1 lbs (15 kg)
Curl Correction Unit
Name Curl Correction Unit (MX-RB27)
Paper sizes Depends on feeder specifications
Useable paper Depends on feeder specifications
Required power
supply
Supplied from the machine
Dimensions 8-7/16" (W) x 30" (D) x 38-13/16" (H)
(214 mm (W) x 762 mm (D) x 986 mm (H))
Weight Approx. 41.9 lbs (19 kg)
Trimming Module
Name Trimming module (MX-TM10)
Useable size for
trimming
module
13" x 19", 12" x 18" (A3 wide), 11" x 17", 8-1/2" x 14", 8-1/2"
x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, SRA3,
A3, B4, A4R
Max. no. of
sheets to be
trimmed
1 to 20 sheets (16 lbs bond to 21 lbs bond (60 g/m
2
to
81.4 g/m
2
))
1 to 10 sheets (21 lbs bond over to 28 lbs bond (81.4 g/m
2
over to 105 g/m
2
))
1 to 3 sheets (28 lbs bond over to 80 lbs cover (105 g/m
2
over to 220 g/m
2
))
When plain paper trimmed. Including one front cover of 110
lbs cover (300 g/m
2
) or less.
Required power
supply
Supplied from saddle stitch finisher
Dimensions 9-7/8" (W) x 24-15/32" (D) x 15-7/8" (H)
(251 mm (W) x 625 mm (D) x 403 mm (H))
Weight Approx. 70.6 lbs (32 kg)
Folding Unit
Name Folding unit (MX-FD10)
Folding types Z-Fold, C-Fold, Accordion Fold, Double Fold, Half Fold.
Useable size for
folding unit
Z-Fold: 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R, A3, B4, A4R
C-Fold, Accordion Fold, Double Fold, Half Fold:
8-1/2" x 11"R, A4R
Useable paper 13 lbs bond to 28 lbs bond (55 g/m
2
to 105 g/m
2
)
Tray capacity
(20 lbs (80 g/m
2
)) *
C-Fold/Accordion Fold/Double Fold
2-23/64" (60 mm) (Equivalent to 40 sheets. (Equivalent to 25
sheets for Double Fold))
Copies made in Z-Fold or Half Fold are output to the tray of
the finisher (100-sheet stapling) or saddle stitch finisher
(100-sheet stapling).
Required power
supply
Supplied from finisher/saddle stitch finisher
Dimensions 13-15/64" (W) x 31-15/64" (D) x 41-11/32" (H)
(336 mm (W) x 793 mm (D) x 1050 mm (H))
Weight Approx. 145.5 lbs (66 kg)
Inserter
Name Inserter (MX-CF11)
Useable size for
inserter
13" x 19", 12" x 18", 9" x 12", 11" x 17", 8-1/2" x 14", 8-1/2" x
13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x
11"R, 7-1/4 x 10-1/2"R, 5-1/2" x 8-1/2"R, A3 wide, A4 wide,
A3, B4, A4, A4R, B5, B5R, A5R, SRA3, SRA4
Useable paper 16 lbs bond to 80 lbs cover (60 g/m
2
to 220 g/m
2
)
No. of trays 2
Tray capacity
(20 lbs (80 g/m
2
))
Upper tray: 200 sheets
Lower tray: 200 sheets
Required power
supply
Supplied from the machine
Dimensions 21-1/4" (W) x 29-7/8" (D) x 50-1/4" (H)
(540 mm (W) x 760 mm (D) x 1276 mm (H))
Weight Approx. 99.2 lbs (45 kg)
mx8081_us_sg.book 13 ページ ２０２０年３月１８日 水曜日 午後６時０分
To Next Page
Loading...
