BEFORE USING THE MACHINE
19
LOAD PAPER INTO THE TRAY 1 - 4
1
Tray 1
Tray 2 - 4
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper,
go to the next step.
When using the tray 1, push the center of the pressure plate down until it locks into place.
2
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Adjust to the paper size so that the paper will not be too
loose or too tight.
To Next Page
Loading...
Need help?
General
