PRINTER
37
PRINTING ON ENVELOPES
The bypass tray can be used for envelope printing.
(1) Click the [Paper Source] tab.
(2) Select the envelope size from "Output Size".
When "Output Size" is set to [DL], "Paper Type" is also automatically set to [Envelope].
(3) Select [Bypass Tray] from the "Paper Tray".
4
Click the [Print] button.
Printing begins.
• Set the paper type of the bypass tray to [Envelope] and load an envelope into the bypass tray.
• When using media such as envelopes that can be loaded only in a specific orientation, you can rotate the image 180
degrees. For more information, see "User's Manual".
► L
oading envelopes (page 22)
To Next Page
Loading...
