Sharp MX-C250

MX-C250 Necessary works before moving the machine 6 – 1
MX-C250
Service Manual
[6] Necessary works before moving the machine
1) If the following options are installed, remove all of them from
the machine.
- Paper pass unit
2) Remove the following consumable parts from the machine.
- Paper
- Toner cartridges
- Development cartridge
3) Lock the following sections.
- Scanner (Optical section)
- Paper cassette lift plate
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.