Sharp MX-C250E

TROUBLE CODES
SHARP
56
L8
02
Full wave signal error
PC
--
Personal counter not installed
U1
01
Battery trouble.
U2
00
MFP EEPROM read/write error
05
HDD/MFPC PWB SRAM contents
inconsistency - Erroneous detection of
account management data / HDD internal
authentication DB table error
10
MFPC PWB SRAM user authentication
index check sum error [MX-C301W]
11
MFP PWB EEPROM check sum error.
[MX-C301W]
24
MFPC PWB SRAM memory user
authentication counter check sum error
[MX-C301W]
30
Serial number discrepancy (MFP – PCU)
[MX-C301W]
40
SD card system storage data error
[MX-C301W]
41
HDD system storage data area error
[MX-C301W]
42
Machine adjustment data (system storage
area) error [MX-C301W]
50
HDD user authentication data sum error
[MX-C301W]
60
Watermark check error. [MX-C301W]
80
SCU PWB EEPROM read/write error
[MX-C301W]
81
SCU PWB EEPROM check sum error
[MX-C301W]
90
PCU PWB EEPROM read/write error
[MX-C301W]
91
PCU PWB EEPROM check sum error
[MX-C301W]
U5
40
SPF communication trouble [MX-C250/300]
U6
10
Desk paper feed unit paper transport
motor trouble [MX-C301W]
U7
50
Communication trouble between main
unit and vendor control [MX-C301W]
51
Vendor machine error [MX-C301W]
U9
00
Communication trouble between the
controller and OPU [MX-C250/300]
81
OPU communication trouble (parity)
[MX-C250/300]
82
OPU communication trouble (overrun)
[MX-C250/300]
84
OPU communication trouble (flaming)
[MX-C250/300]
88
OPU communication trouble (time-out)
[MX-C250/300]
99
OPU language error [MX-C250/300]
UC
02
CPT - ASIC error
20
DOCC ASIC error [MX-C301W]