Sharp MX-C300P User Manual (English)

Other manuals for Sharp MX-C300P

Operation Guide108 pages

Software Setup Guide44 pages

Start Guide40 pages

Questions and Answers:

T
Tina ReynoldsAug 13, 2025
What to do if Sharp MX-C300P Printer does not print and ONLINE indicator is off?
- R
  Roger LoweAug 13, 2025
  If your Sharp Printer is not printing, and the ONLINE indicator is not blinking, first ensure the printer is not in off-line mode by pressing the [SPECIAL FUNCTION] key and selecting "Online/Offline". Then, check the printer cable connections at both ends, and try a different cable to rule out cable issues. Also, verify that you've selected the correct "SHARP MX-XXXX" printer in the print dialog box of your application. Finally, ensure the printer driver is correctly installed; if not, reinstall it.
P
Pamela BatesAug 16, 2025
Why is my Sharp MX-C300P not printing with blinking ONLINE indicator?
- K
  Kenneth HernandezAug 16, 2025
  If your Sharp Printer is not printing and the ONLINE indicator is blinking, ensure that the paper size settings on the printer and in the printer driver are the same. Also, verify that the specified size of paper is loaded in the paper tray.
D
David RamirezAug 21, 2025
How to fix paper misfeed on Sharp MX-C300P?
- T
  Tamara RangelAug 21, 2025
  If your Sharp Printer is experiencing paper misfeeds, ensure you are using paper within the specified size and weight range. Also, avoid using curled or damp paper; replace it with dry paper, and store paper in a dark, dry place when not in use. Make sure the paper is correctly loaded in the tray. Remove any pieces of paper inside the machine. Fan the paper before loading it. If the misfeed occurred in the tray, try turning the paper over or around before reloading. Also, ensure that you are not loading too much paper in the tray. Adjust the guides on the bypass tray to match the width of the paper and make sure the bypass tray extension is pulled out when loading paper. Clean the bypass paper feed roller.
T
Timothy WalkerAug 25, 2025
Why is the printed image from my Sharp MX-C300P dirty?
- A
  allenwarrenAug 25, 2025
  If the printed image from your Sharp Printer is dirty, ensure you are using paper within the specified size and weight range, and that the paper is not curled or damp. Also, set sufficient margins in the paper settings of your application. If black dots or smudges appear, run fixing cleaning mode.
M
Michael EstesAug 27, 2025
How to fix skewed or cut off printed image on Sharp MX-C300P Printer?
- A
  Alyssa FloresAug 28, 2025
  If the printed image from your Sharp Printer is skewed, runs off the paper, or is cut off, verify that the paper loaded in the tray matches the size specified in the printer driver. Also, check the "Image Orientation" setting in the printer driver. Ensure the paper is properly loaded. Finally, check the document margins and paper size settings in your application to ensure they are correctly specified.
D
delgadogloriaAug 31, 2025
Why does my Sharp MX-C300P produce wrinkled prints or missing images?
- H
  harrellmatthewAug 31, 2025
  If wrinkles appear in the paper or the image disappears in places when using your Sharp Printer, ensure you are using paper within the specified size and weight range, and that the paper is not curled or damp. Also, make sure the fusing unit release levers are returned to their original positions.
S
Sara ThompsonSep 5, 2025
Why is the printed image light and uneven on my Sharp Printer?
- B
  burtonleahSep 5, 2025
  If the printed image from your Sharp Printer is light and uneven, check if the paper is loaded correctly, ensuring that printing occurs on the front side of the paper. Some paper types have a specific front and back side, and toner may not adhere well if printed on the wrong side.
J
Jennifer HaleySep 8, 2025
What to do if Sharp MX-C300P does not operate?
- C
  Catherine OnealSep 8, 2025
  If your Sharp Printer does not operate, ensure it is plugged into a grounded outlet and the power switch is turned ON. Allow the printer time to warm up after turning it on. Check that the front or side covers are completely closed. If the printer is in auto power shut-off mode, press the [ENERGY SAVE] key. If a misfeed occurs, see "MISFEED REMOVAL". Finally, make sure the tray is not out of paper; load paper if needed.

Sharp MX-C300P Specifications

General

Print Technology	Laser
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Paper Capacity	600 sheets
Duplex Printing	Yes
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Supported Media Sizes	A4, A5, B5, Legal, Letter
PDL	PCL6, PostScript 3
Type	Multifunction
Category	Color