Sharp MX-C301 Installation Manual

MX-C301 MX-C301/C301W(MAIN UNIT) 2 – 2
2) Open the front cover.
3) Remove the silica gel material.
4) Remove fixing tapes and the caps on the developing units.
NOTE: Be sure to keep the caps. Caps are used when the
machine is transferred to the different location.
B.Scanner lock release
1) Remove the optical unit fixing screw and the red label.
C.Installation of toner cartridges
* The life of each toner cartridge is as follows:
Black toner cartridge: equivalent to approximately 1K (A4/LT
5%)
Color toner cartridge: equivalent to approximately 1K (A4/LT
5%)
1) Shake the toner cartridge (included in package) vertically sev-
eral times.
2) Insert the toner cartridge horizontally and straight until it locks.
NOTE: Be sure to install the color cartridges to their proper posi-
tions. Avoid installation to a different color position.
NOTE: Do not forcibly insert the toner cartridge. Keep holding the
cartridge and completely insert it.
NOTE: When the machine is transported with the developing unit
removed, be sure to remove the toner cartridge. (if not
toner may become clogged.)
NOTE: Do not remove or insert the toner cartridge with the devel-
oper cartridge removed.
NOTE: Press the center of the cartridge until it is locked when
installing the cartridge.
Yellow
Magenta
Cyan
Black

Sharp MX-C301 Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac
Print Speed	30 ppm (black), 30 ppm (color)
Copy Speed	30 cpm (black), 30 cpm (color)