Sharp MX-C507P - Page 206

5028
84 user attendance errors
84 user attendance error messages
Diagnostics and troubleshooting
172
Error code
Description
Action
84.01
The imaging kit is nearly low. The
photoconductor threshold has been reached.
See “Cartridge or photoconductor error service
check” on page 174 .
84.09
The imaging kit is nearly low. The user-selected
EWS set point has been reached.
84.11
The imaging kit is low. The photoconductor
threshold has been reached.
84.19
The imaging kit is low. The user-selected EWS
set point has been reached.
84.21
The imaging kit is very low. The photoconductor
threshold has been reached.
84.29
The imaging kit is very low. The user-selected
EWS set point has been reached.
84.31
Replace the imaging kit. The imaging kit has
exceeded its recommended life span. The
imaging kit may continue to function beyond end
of life.
84.39
Replace the imaging kit. The imaging kit has
exceeded its recommended life span. The
user ‑ selected EWS set point has been reached.
The imaging kit may continue to function beyond
end of life.
84.41
Replace the imaging kit to resume printing. The
photoconductor threshold for “Absolute End of
Life” has been reached.