3
Click
Apps
, click
Export Configuration
, and then select one of the options in the dropdown menu.
4
Click
Export
.
Note:
The size limit of the export file is 128 KB.
Disconnecting ribbon cables
Warning—Potential Damage:
The ribbon cable and its socket may get damaged if it is not properly
disconnected. When disconnecting the cable, hold its connector and press its tab before unplugging it.
Printhead alignment adjustment
Printhead misalignment may cause crooked or skewed print. Perform this procedure after replacing the
printhead or if there are skewed print issues.
Checking the test page for alignment
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments
>
Registration adjust
>
Quick test
2
Check the test page.
To Next Page
Loading...
