Sharp MX-C507P - Page 353

5028
Number pad cover removal
1
2
Remove the badge cover. See “Badge cover removal” on page 320 .
Remove the number pad cover.
Control panel arms removal
Note: The control panel arms are two separate FRUs. This procedure shows how to remove both arms.
1
2
3
Remove the fuser. See “Fuser removal” on page 370 .
Remove the redrive guide. See “Redrive guide removal” on page 390 .
Remove the control panel base cover. See “Control panel base cover removal” on page 324 .
Parts removal
321