Supported paper sizes, types, and weights
The following tables provide information on standard and optional paper sources and the sizes, types, and
weights of paper they support.
Note:
For an unlisted paper size, select the closest
larger
listed size.
Paper sizes supported by the trays and multipurpose feeder
1
Supported only in long‑edge orientation.
2
Supported only using Universal paper size setting.
3
Supported only if Size Sensing is set to Off.
Note:
Banner is supported in the multipurpose feeder only if width up to 215.9 mm (8.5 in.) and length to 1320.8
mm (52 in.). Make sure the paper size setting is set Universal.
105 x 148 mm (4.1 x 5.8 in.)
148 x 210 mm (5.8 x 8.3 in.)
176 x 250 mm (6.9 x 9.8 in.)
182 x 257 mm (7.2 x 10.1 in.)
210 x 297 mm (8.3 x 11.7 in.)
216 x 340 mm (8.5 x 13.4 in.)
76.2 x 127 mm (3 x 5 in.)
101.6 x 127 mm (4 x 5 in.)
140 x 216 mm (5.5 x 8.5 in.)
184 x 267 mm (7.3 x 10.5 in.)
216 x 279 mm (8.5 x 11 in.)
216 x 330 mm (8.5 x 13 in.)
216 x 356 mm (8.5 x 14 in.)
110 x 220 mm (4.3 x 8.7 in.)
162 x 229 mm (6.4 x 9 in.)
176 x 250 mm (6.9 x 9.8 in.)
98 x 191 mm (3.9 x 7.5 in.)
98 x 225 mm (3.9 x 8.9 in.)
To Next Page
Loading...
