Sharp MX-M202D - Page 22

MX-M232D (MX-NB12) 7 - 1
[7] MX-NB12
1. Unpacking 2. Installation
1) Remove the screw. Remove the rear cabinet and the rear cabinet
cover.
2) Connect the bundled AC harness to the power PWB of the
machine.
Note: Connect the connector with the insulation tube of the AC harness
to the power PWB of the machine.
<Taiwan/Brazil/South Africa only>
No. Name Quantity
1 Network PWB mounting unit 1
2 Network PWB mounting unit
(Taiwan/Brazil/South Africa only)
1
3 AC harness 1
4 AC harness (Taiwan/Brazil/South Africa only) 1
5 Rear cabinet cover 1
6 Screw 4
7 CD-ROM 2
1
3
56
7
2
4
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(3)
(4)