Sharp MX-M202D - Page 23

MX-M232D (MX-NB12) 7 - 2
3) Remove one screw, and remove the USB device connector PWB
on the machine side.
4) Install the network PWB mounting unit and fix it with 4 screws.
Then connect the connector.
Connect the AC harness mounted to the main unit. Attach the reuse
snap band to the plate.
<Taiwan/Brazil/South Africa only>
5) Attach the rear cabinet and the rear cabinet cover. Fix it with
screws.
Note: Since the power PWB is at the vicinity of the MX-NB12, use
enough care when repairing it.
(3)
(2)
(1)
(1)
(2)
(2)
(2)
(3)
(3)
(4)
(3)
(2)
(1)
(2)
(2)
(2)
(3)
(3)
(4)
(3)
(2)
(4)
(4)
(4)
(1)
(4)
(4)
(4)
(4)
(4)
(2)
(3)