55
Note: Excludes Part Change/Correction Information.
Measures to prevent noise from main drive unit.
Measures to prevent banding and image blurring caused by the drum
coupling and drum drive shaft within the main drive unit.
Adjustment to improve water-drop like image problem due to insufficient
transfer voltage.
Measures to prevent F2-64 toner replenishment trouble caused by Toner
drive coupling.
Release of Sharpdesk V3.5
Measures to prevent copy & scan problems caused by the distorted
waveguide stick within the lamp unit.
Countermeasures to prevent paper dog-earing when feeding paper from
manual bypass tray.
Measures to prevent toner dispersion from the DV unit.
Countermeasures against clattering noise from 1st delivery change gate.
List of starting powders for Sharp MFPs
Configuring scanning to OSX10.11
Countermeasures against blurred image caused by the Fusing frame within
the fusing unit.
Countermeasure for double feed and reverse of B5/B5R sized paper
Operability improvement of the manual feed extension tray lower
Slider ring discontinued due to change of pressure plate fulcrum screw
Improvement of heat resistance of the ADU paper actuator
Countermeasure for double feed and reverse of B5/B5R size paper
Countermeasures to prevent paper jam in the Delivery unit caused by
Change gate solenoid.
Countermeasures against noise from Right cabinet and/or Manual bypass
when printing duplex.
Improvement to ensure smooth rotation of Deliver guide collars.
Additional steps when installing or removing paper exit options.
Caution when installing Job Separator.
Measures to prevent Lower separation pawls from coming off when
clearing paper jam in the fuser.
Measures to prevent paper jam in manual bypass tray caused by Manual
paper feed guide sheet.
Serial Number Identification
To Next Page
Loading...
