1-3
BEFORE USING THE MACHINE
(8) USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB
memory to the machine.
For the USB cable, use a shielded cable.
(9) Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
+
TURNING THE POWER ON AND OFF (page 1-14)
(10) Tray 1
This holds paper.
+
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-34)
(11) Tray 2 (when a paper tray is installed)*
This holds paper.
+
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-34)
(12) Tray 3 (when a paper tray is installed)*
This holds paper.
+
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-34)
(13) Tray 4 (when a paper tray is installed)*
This holds paper.
+
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-34)
* Peripheral device.
(8)
(11)(10)(9) (12) (13)
To Next Page
Loading...
